LIST #2 OF CONSTRUCTED ELECTRIC DEVICES BEFORE 2005 |
||||
At this web page I've written down my own constructed electric devices that are in a chronologic order. Explainations: E.g. 01/1995 = January 1995 Roman numerals: different in- or outputs. E.g. I, II Letters: different cases of the same in- or output. E.g. A,B VAB(0) = a vacant phone line VAB(1) = a busy phone line VAB(0R) = a vacant phone line with ring signal Icut = the value of current at that moment precisely before the current is cut Ptrans = maximum power of transients ton = time between input signal and activity toff = time between input signal and inactivity tRS = duration of ring signal T0 = period time f = frequency fRTS = frequency of ring tone signal (a tone you can hear in your own phone, while the other phone is ringing) V0 = unloaded voltage of output Veff = VRMS. Veff = û / (sqrt(2)) û = voltage peak value Vins = voltage of input signal Vouts = voltage of output signal Rin or e.g. 1 Mohms = the input resistance is 1 mega ohms (1 million ohms) Rout = resistance of device output FBT = forward-, backward- and time circuits for model trains Device sizes: - (non-existing device), small, medium, medium-large, large If nothing else says the main supply is AC 230 V, 50 Hz. |
||||
SOME INFORMATION ABOUT THE SWEDISH TELEPHONE NETWORK |
||||
If you've got a vacant phone line operating in the Swedish telephone network, the normal direct voltage of that line has got a value between 48 and 54 volts. Usually you use lead acid cells as a backup power supply. The cell voltage is 2 volts in this system. If you've 24 cells, it will be a total voltage of 2 X 24 volts = 48 volts. The direct voltage of a busy phone line is 4 V - 10 V or just 0 volts. A normal working phone disconnect the rest of the phone line. When your phone is ringing, the ring signal is added to the direct voltage of approximately 50 volts. The ring signal is an alternating voltage with a peak value of 95 V - 121 V (approx. AC 76 V) and its frequency is between 22 Hertz and 28 Hertz. At the same time when your phone is ringing, you're able to hear a ring tone signal in your own phone. This tone has got a frequency of 440 Hz and also the Swedish dial tone. References: Telia AB and of my own experiences |
||||
|
||||
Device | Constructed | Location | Some characteristics | Size |
---|---|---|---|---|
Mains Transformer | 01/1991 | Vejbystrand |
Output: I. AC 25 V II. AC 7 V 70 VA (I and II) |
Medium |
DC Power Supply | 08/1991 | Vejbystrand |
I. 0-30 V, 2 A II. 5 V, 0.4 A V-meter (I) |
Large |
RC Oscillator | 10/1991 | Vejbystrand |
Output signal: f: 2-82000 Hz Veff: 3.5 V P: 0.4 W |
Medium-large |
DC-DC Converter | 1993 | Vejbystrand |
Input: 12 V Output: 0-11 V, 0.65 A |
Small |
Christmas Lights Power Supply |
1995 | Vejbystrand | V0: DC 3-16 V, 3.5 A | Medium |
Ring Relay | 1995 | Vejbystrand |
VAB(0R) ton = 0 s. toff = 1 s |
Medium |
Ring Amplifier | 07/1997 | Vejbystrand |
I. VAB(0R) II. VAB(1) 2.3 Mohms (II). Bell |
Medium-large |
Ring Amplifier | 11/1998 | Vejbystrand |
I. VAB(0R) II. VAB(1) 2.3 Mohms (II) Triple tone |
- |
Ring Generator | 11/1998 | Vejbystrand |
Output signal: AC 0-42 V, 9 W A. 25 Hz, B. 50 Hz |
Medium |
Phone Line Indicator | 02/1999 | Vejbystrand |
A. VAB(1)<>0 V B. VAB(0R) Battery. 1 Mohm Output signal: red LED |
Small |
Phone Line Indicator, type 2 |
03/1999 | Vejbystrand |
A. VAB(1) B. VAB(0R) 1.1 Mohm Output signal: yellow LED, blinking (B) |
- |
Phone Line Indicator, type 3 |
03/1999 | Vejbystrand |
A. VAB(1) B. VAB(0R) 1.1 Mohm Output signal: yellow LED, (B) |
Small |
Phone Line Indicator, type B |
03/1999 | Vejbystrand | VAB(1). 2.2 Mohms | Small |
Phone Line DC Generator |
04/1999 | Vejbystrand |
Output signal: A. DC 49 V B. DC 9 V C. 0 V |
Small |
Ring Relay, type 2 |
04/1999 | Vejbystrand |
A. VAB(0R) B. VAB(1) ton = 0.5 s toff: 0.5-12 s. 2.3 Mohms |
Medium |
Phone Line DC Generator, type 2 |
05/1999 | Vejbystrand | DC 49 V | Medium |
Frequency Counter | 09/1999 | Vejbystrand |
Microphone: 20-14000 Hz Signal: 1-39999 Hz |
Medium |
Phone Line Indicator, type blinking |
10/1999 | Vejbystrand |
VAB(1). 10 Mohms Output signal: A. red LED B. red blinking LED |
Small |
DC Power Supply | 11/1999 | Vejbystrand |
I. DC 5 V, 2 A II. DC -5 V, 2 A |
Medium |
Light and Darkness Indicator |
11/1999 | Vejbystrand | Output: AC 230 V, 1700 W |
Medium |
Phone Line Indicator, type blinking 2 |
11/1999 | Vejbystrand |
VAB(1). 10 Mohms Output signal: A. red LED B. red blinking LED |
Small |
Ring Amplifier, type 2 |
01/2000 | Vejbystrand |
A. VAB(0R) B. VAB(1) 5 Mohms. Triple tone |
Medium |
Battery Adapter | 04/2000 | Klippan | DC 9 V, 0.2 A | Small |
Two Timers, which each supplies an engine |
06/2000 | Klippan |
Output signal: I. toff = 18 s II. Se I DC 24 V, 0.6 A |
Medium |
DC Power Supply for a clock |
07/2000 | Klippan | DC 24 V, 1 A | Medium |
Mains Voltage Devider |
08/2000 | Klippan |
Output: I. AC 0-115 V II. AC 0-230 V 50 VA (I and II) |
Medium |
A circuit with a bell in the waiting room |
10/2000 | Ängelholm | V0: DC 28 V, 55 mA | Medium |
Devider and Amplifier of Signal Voltages |
12/2000 | Ängelholm |
Devider: 10-6 - 10-1 times Amplifier: 10 - 10000 times |
Medium |
Time- and Backward Limiter for Model Trains |
12/2000 | Ängelholm |
Vins: DC 22 V toff: 2-3.5 min. Vmin = -12 V |
Medium |
Wire Identifier: receiver |
04/2001 | Ängelholm |
Wire #1: 1 LED is lit -- Wire #10: 10 LEDs are lit. Battery |
Small |
Wire Identifier: transmitter |
04/2001 | Ängelholm |
10 wires and ground. From 2.50 V to 4.75 V by steps of DC 0.25 V. Battery |
Small |
Red Phone Line Indicator Lamp |
05/2001 | Ängelholm |
VAB(1). ton = 0.7 s toff = 16 s. 2.2 Mohms |
Medium |
Time- and Backward Limiter for Model Trains |
05/2001 | Ängelholm |
Vins: DC 15 V toff: 2-3.5 min. Vmin = -8 V |
Medium |
FBT - Limiter | 06/2001 | Ängelholm |
Ins: DC 22 V I. -42%, 170-190 s II. se I |
Medium |
AC Power Supply for FBT - Limiter |
07/2001 | Ängelholm | AC 15 V, 0.17 A | Medium |
Battery Adapter | 07/2001 | Ängelholm | DC 9 V, 0.25 A | Small |
Ring Generator for two phones |
09/2001 | Ängelholm |
I. (A. DC 49 V, B. DC 5 V, C. DC 49 V + AC 35 V) II. Se I tRS = 1.5 s. T0 : 6-7 s fRS = 25 Hz fRTS = 300 Hz |
Medium-large |
Ring Amplifier, type 3 |
10/2001 | Ängelholm |
A. VAB(0R) B. VAB(1) 2 Mohms. Floating tone |
- |
DC Power Supply | 11/2001 | Ängelholm | DC 24 V, 1 A | Medium |
Phone Line Indicator, type C |
12/2001 | Ängelholm | VAB(1). 1 Mohm | Small |
DC Current Supply | 01/2002 | Ängelholm |
Output: DC 22 V, 4 A. Overload protection: Icut = 4.5 A. Transient protection: Ptrans = 1800 W |
Large |
DC Power Supply | 01/2002 | Ängelholm |
0-100 V, 0.1 A. V- and A-meter |
Medium |
Adjustable and Protective Transformers |
04/2002 | Ängelholm |
I. V0: AC 0-260 V, 2 A II. V0: AC 0-160 V, 0.5 A |
Large |
Time Limiter for Model Trains |
06/2002 | Ängelholm |
toff: I. 0-9 min. II. Se I |
Medium |
Ring Amplifier, type 2B |
11/2002 | Ängelholm |
A. VAB(0R) B. VAB(1) 5 Mohms. Triple tone |
Medium |
DC Power Supply | 02/2003 | Ängelholm |
Input: AC 115 V Output: DC 6-15 V, 60 mA. Rechargable batteries |
Medium |
DC Power Supply | 03/2003 | Ängelholm |
I. DC 8 V II. Se I 1 W (I and II) |
Medium |
Twinkling Christmas Lights |
06/2003 | Ängelholm | 5 X 4 bulbs á 12 V, 75 mA |
Medium |
Mains Voltage Device | 09/2003 | Ängelholm |
AC 230 V, 1 A. V- and A-meter |
Medium |
DC Power Supply | 01/2004 | Ängelholm |
Output: DC 12.7 V, 0.18 A. Is able to replace AC 9 V |
Small |
Voltage Measuring Device for Voltage Meter |
06/2004 | Ängelholm |
Voltage range: A. 5-30 V B. 0.5-3 V |
Medium |
Battery Charger | 07/2004 | Ängelholm | DC 6 V, 1.2-10 Ah | Medium |
Testing Device | 08/2004 | Ängelholm |
Output: I. DC 12 V II. A. 12 V, B. 0 V III. A. 0 V, B. 12 V DC 2 A (I, II and III) |
Medium-large |
Phone Line Indicator, type D |
09/2004 | Ängelholm | VAB(1). 1 Mohm | Small |
Phone Line Indicator, type E |
10/2004 | Ängelholm | VAB(1). 6.8 Mohms | Small |
DC Power Supply | 11/2004 | Ängelholm |
Input: AC 115 V Output: DC 6-15 V, 80 mA |
Medium |
Menu of Links Göran Holbeck's Website |